Contract Number
GS-07F-9386S
Click Here
for more information.

25mm Envelop Cover Instructions

The following instructions are available for download as a PDF document by
RIGHT-CLICKING HERE.
Choose "Save Target As..." to download a local copy of this PDF file to your computer.

25 MM GUN ENVELOP COVER INSTALLATION INSTRUCTIONS:

1. Remove excess grease from the weapon. We recommend using a dry lubricant on the barrel with the Envelop Cover.
   
   
2. Install Barrel cover, pulling all the way on to the barrel. Secure to the receiver end with the Velcro strap. The Main Mount cover will overlap the barrel cover, keeping moisture off of the barrel.
   
   
3. Install Main gun mount cover by grasping the stiffener in the center of the cover and holding the sides wide open (best done by two individuals). Place the cover over the mount from above and behind the mount. The stiffeners should intersect at the gun sight and the rest of the cover drape nicely around the weapon. The Velcro seam will fasten directly under the barrel.
   
   
4. Fasten the Velcro seam and connect the nylon buckles.
   
   
5. Cinch the nylon strap, drawing the bottom of the cover in snugly around the bottom of the weapon.
   
   
6. Secure the Velcro strap from main mount around the barrel cover.
   
   
7. Leave the cover on as much as possible. When not in use, store the cover in an internal area.
   
   
8. Review Envelop Cover DVD provided to with your MK 95 Twin .50 Cal gun covers for more information regarding care & maintenance of Envelop Covers.
   
   

We appreciate your business and you are welcome to contact us with questions, comments or concerns at any time.